Pipes

Plastic pipes made of PVC is strong and light in weight as its specific about 20% of the specific weight of Pipes made of cast iron, handling and transportation of this kind of pipes is easier than other Kinds of Pipes made of metal or asbestos cement and similar, so we should follow below steps :- P.V.C. pipes need attention and care during loading, unloading and storing, specially during unloading from trucks into ground. It is not recommended to put the pipes in large piles, in the summer or at hot weather that causes a distortion of the pipes, especially at the bottom of the patch that make it difficult to connect the pipes. Storage pipes must be at reciprocal manner by the head and tail. In long – term storage, the private shelves must be ensured for storing, if not wooden planks With 75 mm as width and 100 cm as a distance between each two planks starting from 160 mm diameter and up. In case of storing pipes with different sizes at the same time on the same shelves, bigger sizes must be below smaller size pipes. For temporary storage at working site, the storing area must be flat and free of stones or similar. 7- At unloading pipes, they must be rolled gently on the wooden planks and not to be thrown on Other or on unequipped floor in case of crane or truck absence. 8- Storage area must be shaded to prevent direct sunlight affect on pipes.